Order Products : sales@su-jiao.com
CERTENE™ LLGF-120A
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HeOcoo_CERTENE-LLGF-120A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| LLGF-120A is a certified prime grade Ethylene-Octene Copolymer specially developed for production of High Performance Blown films of outstanding mechanical properties, LLGF-120A features easy processability and films exhibit high toughness, very good Elmendorf Tear, high Impact strength and Puncture resistance. LLGF-120A major applications include film coextrusion, super strength liners, lamination films, stretch wrapping films, food packaging, and superior load retention carry-on-bags. Maximum recommended film drawdown is 0.4 mil. LLGF-120A contains no slip and no antiblock. LLGF-120A complies with FDA regulation 21CFR 177.1520 (c) 3.2(a) and most international regulations concerning the use of Polyethylene in contact with food articles. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 25 | µm | |
| secant modulus | ASTM D882 | ||
| 1% secant, MD : 25 µm | 186 | MPa | ASTM D882 |
| 1% secant, TD : 25 µm | 207 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 25 µm | 10.0 | MPa | ASTM D882 |
| TD : Yield, 25 µm | 10.0 | MPa | ASTM D882 |
| MD : Break, 25 µm | 48.0 | MPa | ASTM D882 |
| TD : Break, 25 µm | 44.0 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 25 µm | 440 | % | ASTM D882 |
| TD : Break, 25 µm | 770 | % | ASTM D882 |
| Dart Drop Impact 1(25 µm) | 330 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD : 25 µm | 400 | g | ASTM D1922 |
| TD : 25 µm | 730 | g | ASTM D1922 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°, 25.0 µm, Blown Film) | 45 | ASTM D2457 | |
| Haze (25.0 µm, Blown Film) | 14 | % | ASTM D1003 |
| Additional Information |
|---|
| Film Specimen: 1.0 mil (25 µm) film, melt temperature 420-450°F (215-230°C), blow-up-ratio 2.5 :1. |
| Note Message | |
|---|---|
| 1 . | F50 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makroblend® UT5205 | Covestro - Polycarbonates | PC+PBT | Makroblend® |
| TEKNIFLEX® VDC 250-40 | Tekni-Films, a div of Tekni-Plex | Film, PVC/PVDC | TEKNIFLEX® |
| Spartech Polycom SC5-2025 | Spartech Polycom | PP Copolymer | Spartech |
| Comai 733-2 AB | Comai Ltda | LLDPE | Comai |
| DILAMID® 66 GREY 2812 | Dilaplast S.p.A. | Nylon 66 | DILAMID® |
