Order Products : sales@su-jiao.com
Generic Alkyd - Mineral
| Category: | Alkyd , Alkyd |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HdfYM6_Generic-Alkyd---Mineral.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic Alkyd - Mineral This information is provided for comparative purposes only. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.09 to 2.15 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (23°C) | 0.30 to 0.45 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.050 to 0.30 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Barcol Hardness | 60 to 65 | ASTM D2583 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Strength (Yield, 23°C) | 82.7 to 105 | MPa | ASTM D790 |
| Compressive Strength (23°C) | 124 to 159 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 77 to 160 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 232 to 260 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength (23°C) | 12 to 13 | kV/mm | ASTM D149 |
| Dielectric Constant (23°C) | 5.98 to 7.30 | ASTM D150 | |
| Dissipation Factor (23°C) | 0.010 to 0.070 | ASTM D150 | |
| Arc Resistance | 180 to 186 | sec | ASTM D495 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris ABS LPT381 | Sincerity Australia Pty Ltd. | ABS | Sindustris ABS |
| FHR Polypropylene AP4135-HS | Flint Hills Resources, LP | PP Impact Copolymer | FHR Polypropylene |
| Five Plus™ HPP40T | Noble Polymers | PP Homopolymer | Five Plus™ |
| Hypro® PP- CP 35/1.5C | Entec Polymers | PP Impact Copolymer | Hypro® |
| ALTECH® PC ECO 1000/521 IM UV | ALBIS PLASTIC GmbH | PC | ALTECH® PC |
