Order Products : sales@su-jiao.com
CERTENE™ PRB-2C
| Category: | PP Random Copolymer , Polypropylene Random Copolymer |
| Manufacturer: | Muehlstein |
| Trademark: | CERTENE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HdTGmY_CERTENE-PRB-2C.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRB-2C is a certified prime grade Clarified BLOW MOLDING developed for high contact clarity containers produced by Extrusion and blow or injection molding processes. PRB-2C is a high purity resin of high melt strength offering optimized melt stability for consistent and easy processability, good core release, high Impact strength, Stiffness, and high Gloss surfaces. PRB-2C typical applications include cosmetics, toiletry, and health aid products requiring superior Clarity, Rigidity and Toughness. PRB-2C complies with FDA regulation 21CFR 177.1520 and most international regulations concerning Polypropylene use in contact with food. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.902 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 29.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield) | 12 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 1 | 1030 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact 2(23°C) | 270 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load 3(0.45 MPa, Unannealed) | 82.0 | °C | ASTM D648 |
| Vicat Softening Temperature 4 | 135 | °C | ASTM D1525 |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| 2 . | Specimens were injection molded per conditions in ASTM D4101. |
| 3 . | Specimens were injection molded per conditions in ASTM D4101. |
| 4 . | Specimens were injection molded per conditions in ASTM D4101. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SILVER® PBT1460G10 | Guangdong Silver Age Sci & Tech. Co., Ltd | PBT | SILVER® |
| ACLAR® 11A (4 mil) | Honeywell | PCTFE | ACLAR® |
| DENILEN B 2010 CB | Vamp Tech | PP, Unspecified | DENILEN |
| Hifax CA10GC | LyondellBasell Industries | TPO (POE) | Hifax |
| Hostacom NXO21001 | LyondellBasell Industries | PP Copolymer | Hostacom |
