Order Products : sales@su-jiao.com
BorSafe™ ME3440-D
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | BorSafe™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HctSsD_BorSafe-ME3440-D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
BorSafe ME3440-D is a bimodal polyethylene compound produced by the advanced Borstar technology. BorSafe ME3440-D is classified as an MRS 8.0 material (PE80). |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.954 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (190°C/5.0 kg) | 0.85 | g/10 min | ISO 1133 |
| Carbon Black Dispersion | ISO 18553 | ||
| Carbon Black Content | 2.0 - 2.5 | % | ISO 6964 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Resistance to Slow Crack Growth 2(80°C) | > 2000 | hr | ISO 13479 |
| resistant to rapid crack propagation, Pc- S4 test 3(0°C, 250 mm) | 2.50 | bar | ISO 13477 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxidation Induction Time (210°C) | > 20 | min | ISO 11357-6 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (1.00 mm) | 800 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 19.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Break) | > 600 | % | ISO 527-2 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 190 - 210 | °C | |
| Cylinder Zone 2 Temp. | 190 - 210 | °C | |
| Cylinder Zone 3 Temp. | 190 - 210 | °C | |
| Cylinder Zone 4 Temp. | 190 - 210 | °C | |
| Cylinder Zone 5 Temp. | 190 - 210 | °C | |
| Melt Temperature | 200 - 220 | °C | |
| Die Temperature | 200 - 210 | °C |
| Extrusion instructions |
|---|
| Head Temperature: 200 to 210°C |
| Note Message | |
|---|---|
| 1 . | Compound |
| 2 . | 9.2 bar |
| 3 . | SDR11 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Medalist® MD-12283 X (PRELIMINARY DATA) | Teknor Apex Company | TPE | Medalist® |
| Telcar® TL-2470A | Teknor Apex Company | TPE | Telcar® |
| NEXT SIGNATURE PA6 G33-100 | NEXT Specialty Resins, Inc. | Nylon 6 | NEXT SIGNATURE |
| HANWHA CTBA-8740BK | Hanwha Chemical | Polyolefin, Unspecified | HANWHA |
| ULTEM™ 2410 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
