Order Products : sales@su-jiao.com
Halene L 73005TU
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene L |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HcThSH_Halene-L-73005TU.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
73005 TU is a Rotomolding grade LLDPE produced by the Spherilene Technology with controlled morphology, excellent balance of Processability, Mechanical Properties and UV Stability. 73005TU is stabilized adequately with Light Stabilser + to give a long service life under outdoor exposure. 73005 TU is ideally suited for Tanks and Containers with good UV stability for domestic and industrial water storage, sanitation and agriculture. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.934 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 5.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Injection Molded) | 17.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Injection Molded) | > 500 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 500 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 500 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 74.0 | °C | ASTM D648 |
| Vicat Softening Temperature | 115 | °C | ASTM D1525 4 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Oven Temperature | 240 to 280 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | Loading 1 (10 N) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RONFALIN® CP55 | A. Schulman Europe | ABS | RONFALIN® |
| Staramide AG3 | Eurostar Engineering Plastics | Nylon 66 | Staramide |
| SureSpec PET-76 | Genesis Polymers | PET | SureSpec |
| 4LAC® 10H20800 | 4Plas | ABS | 4LAC® |
| ESENTTIA 60H92 | Polipropileno del Caribe S.A. | PP Homopolymer | ESENTTIA |
