Order Products : sales@su-jiao.com

Genestar™ TA112

Category:	Nylon 9T , Polyamide 9T
Manufacturer:	Kuraray Co., Ltd.
Trademark:	Genestar™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Hc1dSZ_Genestar-TA112.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Genestar™ TA112 is a reinforced injection grade.

Main features of TA112 are;

High reflectivity

Less color change by heat and light

High reliability

Examples of application are;

LED reflectors

General Information
Filler / Reinforcement	Filler
Features	High Heat Resistance High Reflectivity
Uses	Reflectors
Processing Method	Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	1.48	g/cm³	ISO 1183
Molding Shrinkage
Flow : 1.00 mm	0.50	%
Across Flow : 1.00 mm	0.90	%

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength	75.0	MPa	ASTM D638
Tensile Elongation (Break)	1.5	%	ASTM D638
Flexural Modulus	6000	MPa	ASTM D790
Flexural Strength	140	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)	275	°C	ASTM D648

Electrical	Nominal Value	Unit	Test Method
Volume Resistivity	1.0E+16	ohms·cm	ASTM D257

Flammability	Nominal Value	Unit	Test Method
Flame Rating (3.00 mm)	HB		UL 94

Additional Information	Nominal Value	Unit
Bar Flow Length ¹(320°C, 500.0 µm)	4.40	cm

Note Message
1 .	750kgf

Resin Grade	Manufacturer	Category	Trademark
Wondel® P PI0	Nanjing Julong Engineering Plastics Co., LTD	PP, Unspecified	Wondel® P
DJSilicone NE-9150	DONGJUE SILICONE (NANJING) CO., LTD	Silicone	DJSilicone
Fiberfil® J-60/40/E/EX	Fiberfil® Engineered Plastics Inc.	PP Homopolymer	Fiberfil®
Eltex® B4020N1332	INEOS Olefins & Polymers Europe	HDPE Copolymer	Eltex®
Huafon HF-1380A	Huafon Group Co., Ltd.	TPU-Polyester	Huafon