Order Products : sales@su-jiao.com
Bio-Flex® F 5710
| Category: | PLA , Polylactic Acid |
| Manufacturer: | FKuR Kunststoff GmbH |
| Trademark: | Bio-Flex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HWygyZ_BioFlexF5710.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Biodegradable compound for film extrusion. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.29 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 - 4.5 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2130 | MPa | ISO 527-2 |
| Tensile Stress | ISO 527-2 | ||
| Yield | 37.0 | MPa | ISO 527-2 |
| Fracture | 15.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | 65 | % | ISO 527-2 |
| Flexural Modulus | 2300 | MPa | ISO 178 |
| Flexural Stress (3.5% Strain) | 51.0 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength 1 | 30 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength 2 | No Break | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melting Temperature (DSC) | 150 - 170 | °C | ISO 3146 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 150 | °C | |
| Middle Temperature | 160 | °C | |
| Front Temperature | 175 | °C | |
| Nozzle Temperature | 190 | °C | |
| Mold Temperature | 25 - 40 | °C | |
| Holding Pressure | 40.0 - 60.0 | MPa |
| Injection instructions |
|---|
| Holding pressure level: 40 - 60 %Melt cushion (of volume): <10 %Cooling Time: 15 sec.max. Dwell time 300 sec. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 160 | °C | |
| Cylinder Zone 2 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 175 | °C | |
| Cylinder Zone 4 Temp. | 180 | °C | |
| Adapter Temperature | 185 | °C | |
| Die Temperature | 190 | °C |
| Note Message | |
|---|---|
| 1 . | RT |
| 2 . | RT |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PP-H A 4920/106 MR20 | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
| Elastron® G G103.A70.N | Elastron USA, Inc. | SEBS | Elastron® G |
| EPS Silver® S200R | INEOS Styrenics International SA | PS (EPS) | EPS Silver® |
| Kepamid® 2325GVS | Korea Engineering Plastics Co., Ltd | Nylon 66 | Kepamid® |
| Rotuba CAP CP808 (9% Plasticizer) | Rotuba Extruders, Inc. | CAP | Rotuba CAP |
