Order Products : sales@su-jiao.com

Extir® CM Galileo Europa 5 AE

Category:	PS (EPS) , Expanded Polystyrene
Manufacturer:	Versalis S.p.A.
Trademark:	Extir®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	HW8g1r_Extir-CM-Galileo-Europa-5-AE.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Extir CM is the new range of expandable products produced using Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of blowing agent. Extir CM does not contain CFC or HCFC. Extir CM Galileo Europa 5 AE contains an atherman additive that reduces heat transfer and the items produced with it, grey in colour, have excellent thermal insulation properties. Its particular formula permits the use of thinner boards to get the same thermal resistance. Applications Extir CM Galileo Europa 5 AE achieves optimum thermal insulation performance. It is therefore recommended for all applications in which thickness is a limiting factor: cavity wall insulation floor insulating boards

Message

Extir CM is the new range of expandable products produced using Continuous Mass technology. All the products have a very low dimensional dispersion and a reduced content of blowing agent. Extir CM does not contain CFC or HCFC.
Extir CM Galileo Europa 5 AE contains an atherman additive that reduces heat transfer and the items produced with it, grey in colour, have excellent thermal insulation properties. Its particular formula permits the use of thinner boards to get the same thermal resistance.

Applications
Extir CM Galileo Europa 5 AE achieves optimum thermal insulation performance. It is therefore recommended for all applications in which thickness is a limiting factor:

cavity wall insulation

floor insulating boards

General Information
Additive	Blowing Agent Flame Retardant Heat Stabilizer
Features	Expandable Flame Retardant Good Surface Finish Low Shrinkage Thermally Insulating
Uses	Flooring Insulation
Agency Ratings	DIN 4102/B1
Appearance	Grey

Physical	Nominal Value	Unit
Density	0.0120 to 0.0250	g/cm³
Apparent Density
-- ¹	0.01	g/cm³
-- ²	0.02	g/cm³
--	0.59 to 0.63	g/cm³
Particle Size	0.900 to 1.60	mm

Note Message
1 .	on a continuous pre-expander after two expansions
2 .	on a discontinuous pre-expander

Resin Grade	Manufacturer	Category	Trademark
POLYTROPE® STR 3035EU-01 NATURAL	A. Schulman Inc.	Polyolefin, Enhanced (Capstock Resin)	POLYTROPE®
TRILOY® 210GNH30	Samyang Corporation	PC+ABS	TRILOY®
Plaslube® PA6/6 CF30 TL15 HS BK	Techmer Engineered Solutions	Nylon 66	Plaslube®
POLYFORT® FPP 40 GFC SHI	A. Schulman Europe	PP Homopolymer	POLYFORT®
LEXAN™ 925 resin	SABIC Innovative Plastics	PC	LEXAN™