Order Products : sales@su-jiao.com
Thermoset Plastics SC-102
| Category: | Silicone , Silicone |
| Manufacturer: | Thermoset, Lord Chemical Products |
| Trademark: | Thermoset Plastics |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HVw0cQ_Thermoset-Plastics-SC-102.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Thermoset Plastics SC-102 is a Silicone material. It is available in North America for casting or encapsulating. Primary attribute of Thermoset Plastics SC-102: Insulating. Typical application of Thermoset Plastics SC-102: Wire & Cable |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.968 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 26 | ASTM D2240 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| CLTE - Flow | 1.4E-3 | cm/cm/°C | ASTM D696 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 2.5E+15 | ohms·cm | ASTM D257 |
| Dielectric Constant | ASTM D150 | ||
| 100 Hz | 2.98 | ||
| 100 kHz | 2.96 | ||
| Dissipation Factor | ASTM D150 | ||
| 100 Hz | 2.8E-3 | ||
| 100 kHz | 2.0E-4 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Components | |||
| Hardener | Mix Ratio by Weight: 1.0 | ||
| Resin | Mix Ratio by Weight: 1.0 | ||
| Thermoset Mix Viscosity (25°C) | 340 | cP | ASTM D2393 |
| Demold Time (25°C) | 480 to 720 | min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® LDPE 2200H2 | Saudi Basic Industries Corporation (SABIC) | LDPE | SABIC® LDPE |
| NORDEL™ IP 3430 | The Dow Chemical Company | EPDM | NORDEL™ |
| DENYL 6 0037 ST | Vamp Tech | Nylon 6 | DENYL |
| IDI SMC S51 (Glass Content 25%) | IDI Composites International | TS, Unspecified | IDI SMC |
| 3M™ Dyneon™ PTFE Compound TF 6718 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ PTFE Compound |
