Baynat® 3002

Category:	PUR-Ether/MDI , Polyurethane (Polyether, MDI)
Manufacturer:	Covestro - PUR
Trademark:	Baynat®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	HO9Qgb_Baynat-3002.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Baynat 3002 polyurethane foam system is used in automotive headliner applications. The Baynat 3002 polyurethane system is supplied as two reactive liquid components. Component A is a polymeric diphenylmethane diisocyanate (MDI). Component B is a polyether polyol system. Baynat 3002 polyurethane foam system is used in automotive headliner applications. This system allows low weight, good thermal dimensional stability, and high definition of surface structure. As with any product, use of the Baynat 3002 system in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability.

General Information
Features	Good dimensional stability Thermal stability, good
Uses	Foam Application in Automobile Field Car interior parts
Forms	Liquid

Physical	Nominal Value	Unit	Test Method
Density	0.0300	g/cm³	ASTM D3574A

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	2.78	MPa
Tensile Strength	0.269	MPa	ASTM D3575

Elastomers	Nominal Value	Unit	Test Method
Tear Strength ¹	0.893	kN/m	ASTM D624
Compression Set ²	14	%

Thermoset	Nominal Value
Thermoset Components
Component a	按重量计算的混合比: 160 - 170
Component B	Mixing ratio by weight: 100

Additional Information
Part A Type: Isocyanate Appearance: Dark brown liquid Specific Gravity at 25°C: 1.24 Flash Point PMCC: >93°C Bulk Density at 25°C: 10.3 lb/gal Part B Type: Polyol Blend Appearance: Pale Yellow Liquid Specific Gravity at 25°C: 1.045 Flash Point PMCC: 122°C Bulk Density at 25°C: 9.01 lb/gal Processing Parameters: Chemical Temperature: 20 to 22°C Material Pressures: 13 to 20 bar Stirrer Speed: 1800 to 2000 rpm Lid Usage: No Lid

Additional Information

Part A Type: Isocyanate Appearance: Dark brown liquid Specific Gravity at 25°C: 1.24 Flash Point PMCC: >93°C Bulk Density at 25°C: 10.3 lb/gal Part B Type: Polyol Blend Appearance: Pale Yellow Liquid Specific Gravity at 25°C: 1.045 Flash Point PMCC: 122°C Bulk Density at 25°C: 9.01 lb/gal Processing Parameters: Chemical Temperature: 20 to 22°C Material Pressures: 13 to 20 bar Stirrer Speed: 1800 to 2000 rpm Lid Usage: No Lid

Note Message
1 .	C mould
2 .	50%

Resin Grade	Manufacturer	Category	Trademark
Multilon® DN-3710F	TEIJIN LIMITED	PC+ABS	Multilon®
APEX® 3070	Teknor Apex Company	PVC, Flexible	APEX®
EPT 8120E	Mitsui Chemicals, Inc.	EPDM	EPT
HIVOREX BL6200	Lotte Chemical Corporation	HDPE	HIVOREX
LEXAN™ SLX2432T resin	SABIC Innovative Plastics	PC	LEXAN™