Akulon® Ultraflow K-FHG8

Category: Nylon 6 , Polyamide 6
Manufacturer: DSM Engineering Plastics
Trademark: Akulon® Ultraflow
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: HMnAu4_Akulon-Ultraflow-K-FHG8.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Akulon® Ultraflow K-FHG8 is a Polyamide 6 (Nylon 6) material filled with 40% glass fiber. It is available in Europe or North America.

Important attributes of Akulon® Ultraflow K-FHG8 are:
  • Flame Rated
  • Heat Stabilizer
  • High Flow
General Information
Filler / Reinforcement
  • Glass Fiber, 40% Filler by Weight
Additive
  • Heat Stabilizer
Features
  • Heat Stabilized
  • High Flow
Forms
  • Pellets
PhysicalDryConditionedUnitTest Method
Density 1.45--g/cm³ISO 1183
Molding Shrinkage ISO 294-4
     Across Flow 0.90--%
     Flow 0.20--%
Water Absorption ISO 62
     Saturation, 23°C 5.4--%
     Equilibrium, 23°C, 50% RH 1.7--%
MechanicalDryConditionedUnitTest Method
Tensile Modulus 125008500MPaISO 527-2
Tensile Stress (Break)195135MPaISO 527-2
Tensile Strain (Break)3.06.0%ISO 527-2
Flexural Modulus 11300--MPaISO 178
Flexural Stress 275--MPaISO 178
ImpactDryConditionedUnitTest Method
Charpy Notched Impact Strength ISO 179/1eA
     -30°C 1212kJ/m²
     23°C 1724kJ/m²
Charpy Unnotched Impact Strength ISO 179/1eU
     -30°C 7575kJ/m²
     23°C 95100kJ/m²
ThermalDryConditionedUnitTest Method
Heat Deflection Temperature
     0.45 MPa, Unannealed 220--°CISO 75-2/B
     1.8 MPa, Unannealed 200--°CISO 75-2/A
Melting Temperature 1220--°CISO 11357-3
CLTE ISO 11359-2
     Flow 1.5E-5--cm/cm/°C
     Transverse 6.0E-5--cm/cm/°C
ElectricalDryConditionedUnitTest Method
Surface Resistivity --> 1.0E+15ohmsIEC 60093
Volume Resistivity > 1.0E+15> 1.0E+15ohms·cmIEC 60093
Relative Permittivity IEC 60250
     100 Hz 3.5014.0
     1 MHz 3.304.30
Dissipation Factor IEC 60250
     100 Hz 5.0E-30.30
     1 MHz 0.0150.12
Comparative Tracking Index 500--VIEC 60112
FlammabilityDryConditionedUnitTest Method
Flammability Classification (1.50 mm)HB--IEC 60695-11-10, -20
InjectionDryUnit
Drying Temperature 80.0°C
Drying Time 4.0 to 8.0hr
Rear Temperature 230 to 250°C
Middle Temperature 230 to 260°C
Front Temperature 230 to 260°C
Nozzle Temperature 250 to 280°C
Processing (Melt) Temp 245 to 270°C
Mold Temperature 40.0 to 80.0°C
Injection Rate Moderate-Fast
Back Pressure 3.00 to 10.0MPa
Screw Compression Ratio 2.5:1.0
Note Message
1 .10°C/min
Resin Grade Manufacturer Category Trademark
Starpylen HT 25 MC Eurostar Engineering Plastics PP, Unspecified Starpylen
THERMOLAST® K TC7TPZ (Series: GP/AP) KRAIBURG TPE TPE THERMOLAST® K
EZPrene 9055A ENPLAST Americas, a Ravago Group Company TPV EZPrene
Ecodear® V554X51 Toray Resin Company PLA Ecodear®
HAIPLEN H30 G10 BA Taro Plast S.p.A. PP Homopolymer HAIPLEN