Order Products : sales@su-jiao.com
TAISOX 9007
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Formosa Plastics Corporation |
| Trademark: | TAISOX |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HL9YXI_TAISOX-9007.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
TAISOX 9007 is a high density polyethylene material,. This product is available in North America, Europe or Asia Pacific. The processing method is extrusion. The main features of TAISOX 9007 are:
Typical application areas include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.947 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.75 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | 48.0 | hr | ASTM D1693 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 65 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 22.6 | MPa | ASTM D638 |
| Fracture | 24.5 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 600 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | 255 | kJ/m² | ASTM D1822 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -70.0 | °C | ASTM D746 |
| Vicat Softening Temperature | 120 | °C | ASTM D1525 |
| Melting Temperature | 128 | °C |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric Constant (1 MHz) | 2.30 | ASTM D150 | |
| Dissipation Factor (1 MHz) | 6.0E-5 | ASTM D150 |
| Additional Information |
|---|
| Notched Izod Impact Strength, ASTM D256: 6 kg-cm/cm² |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 220 - 250 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer KE-5540U | Shin-Etsu Silicones of America | Silicone Rubber, HTV | Shin-Etsu Elastomer |
| ELASTOSIL® RT 728 A/B | Wacker Chemie AG | Silicone | ELASTOSIL® RT |
| Kpren 135C | Shandong Xuye New Materials Co., Ltd. | CPE | Kpren |
| Shida 101 | JINJIANG City SHIDA Plastic Fine Co., Ltd. | SBS | Shida |
| ESTOPLAST XU 150WW01 | Ester Industries Ltd. | Nylon 6 | ESTOPLAST XU |
