Order Products : sales@su-jiao.com
TPV Elastoprene® N90A-i00
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | Elastómeros Riojanos S.A. |
| Trademark: | TPV Elastoprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HIgGe7_TPVElastopreneN90Ai00.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ni Series - TPV Elastoprene® It is a mixture of polypropylene and dynamically vulcanised EPDM rubber (PP/EPDM), with properties similar to those of other rubber products but with better results than traditional plastic materials. It has good resistance to the effects of ozone, UV rays and diverse chemical products, with an operating temperature of up to 135°C. It comes in pellet form, and it is transformed by means of traditional machinery used for plastic. It is a completely recyclable and reusable material. Recommended for injection and co-injection transformation processes. The excellent properties of this material make it ideal for the demanding requirements of the automotive industry. Its main application is for the manufacture of injected and co-injected products that require an elastic functionality in sealing systems. In the construction industry, it can be used for supports, stops, sealing and expansion joints. It is also used in the manufacture of membranes, tool handles and other types of consumer products. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.960 | g/cm³ | ISO 1183/A |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shao A, 5 seconds, 6.00mm, injection molding) | 90 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain, 2.00 mm) | 5.50 | MPa | ISO 37 |
| Tensile Stress 2(Yield, 2.00 mm) | 11.0 | MPa | ISO 37 |
| Tensile Elongation 3(Break, 2.00 mm) | 420 | % | ISO 37 |
| Tear Strength 4(23°C, 2.00 mm) | 21 | kN/m | ISO 34-1 |
| Compression Set 5(70°C, 22 hr) | 48 | % | ISO 815 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -50.0 | °C | ISO 812 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (2.0 mm) | HB | UL 94 |
| Additional Information | Nominal Value | Test Method | |
|---|---|---|---|
| Ozone Resistance | 0 Rating | ISO 1431-1 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80 | °C | |
| Suggested Max Regrind | 20 | % | |
| Nozzle Temperature | 200 - 220 | °C | |
| Processing (Melt) Temp | 180 - 200 | °C |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| 4 . | Method A, Pant-Shaped Specimen |
| 5 . | Type a |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULABLEND® (PC/ASA) WR 5 UV CA | A. Schulman Europe | ASA+PC | SCHULABLEND® |
| Ultramid® 1C | BASF Corporation | Nylon 66/6 | Ultramid® |
| Avalon 44 | Greene, Tweed & Co. | PTFE | Avalon |
| Durethan® DP 1441/40 H2.0 EF 900116 | LANXESS Corporation | Nylon 6 | Durethan® |
| TECHNYL® A 218 V33 NATURAL | Solvay Engineering Plastics | Nylon 66 | TECHNYL® |
