Order Products : sales@su-jiao.com
Latamid 6 H2E04 G/30
| Category: | Nylon 6 , Polyamide 6 |
| Manufacturer: | LATI S.p.A. |
| Trademark: | Latamid |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HHhWfL_Latamid-6-H2E04-G-30.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Compound based on Polyamide 6 (PA 6). Heat stabilised. Toughened. Glass fibres. Good elongation properties. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.33 | g/cm³ | ISO 1183 |
| Molding Shrinkage 1 | ISO 294-4 | ||
| Across Flow : 2.00 mm | 0.55 to 0.75 | % | |
| Flow : 2.00 mm | 0.25 to 0.50 | % |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | ISO 527-2/1 | ||
| 23°C | 8300 | MPa | |
| 60°C | 6700 | MPa | |
| 90°C | 4400 | MPa | |
| 120°C | 3600 | MPa | |
| 150°C | 2900 | MPa | |
| Tensile Stress | ISO 527-2/5 | ||
| Yield, 60°C | 120 | MPa | |
| Yield, 90°C | 95.0 | MPa | |
| Yield, 120°C | 80.0 | MPa | |
| Yield, 150°C | 70.0 | MPa | |
| Break, 23°C | 150 | MPa | |
| Break, 60°C | 115 | MPa | |
| Break, 90°C | 90.0 | MPa | |
| Break, 120°C | 75.0 | MPa | |
| Break, 150°C | 65.0 | MPa | |
| Tensile Strain | ISO 527-2/5 | ||
| Yield, 60°C | 4.6 | % | |
| Yield, 90°C | 6.0 | % | |
| Yield, 120°C | 7.0 | % | |
| Yield, 150°C | 8.0 | % | |
| Break, 23°C | 3.5 | % | |
| Break, 60°C | 4.8 | % | |
| Break, 90°C | 6.0 | % | |
| Break, 120°C | 7.0 | % | |
| Break, 150°C | 8.0 | % |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 80 | kJ/m² | ISO 179/1eA |
| Charpy Unnotched Impact Strength (23°C) | No Break | ISO 179/1eU | |
| Notched Izod Impact (23°C, 3.20 mm) | 180 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, Unannealed | 220 | °C | ISO 75-2/B |
| 1.8 MPa, Unannealed | 205 | °C | ISO 75-2/A |
| Continuous Use Temperature 2 | 100 | °C | |
| Vicat Softening Temperature | 215 | °C | ISO 306/B50 |
| CLTE - Flow (30 to 100°C) | 3.0E-5 | cm/cm/°C | ASTM D696 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.0 to 100 | °C | |
| Drying Time | 3.0 | hr | |
| Processing (Melt) Temp | 240 to 260 | °C | |
| Mold Temperature | 60.0 to 80.0 | °C | |
| Injection Rate | Moderate |
| Note Message | |
|---|---|
| 1 . | at 60 Mpa of cavity pressure |
| 2 . | 20,000 hr |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Adstif EA648P | LyondellBasell Industries | PP, High Crystal | Adstif |
| KRATON® D2109 DS-N | Kraton Polymers LLC | SBS | KRATON® |
| Laticonther 87/28 GR/50 | LATI S.p.A. | PC | Laticonther |
| Plaslube® PC / ABS 720 BK | Techmer Engineered Solutions | PC+ABS | Plaslube® |
| HiFill® PP LGF30 2000 BK 12MM | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
