Order Products : sales@su-jiao.com
APICAL 50AV
| Category: | Film, PI , Thermoset Polyimide |
| Manufacturer: | Kaneka Corporation |
| Trademark: | APICAL |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HGeQQ0_APICAL-50AV-5209.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| APICAL 50AV is a PI Film material. It is available in Latin America or North America. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Molding Shrinkage | IPC TM-650 2.2.4 | ||
| Flow : 150°C, 30 min | < 0.10 | % | |
| Across Flow : 150°C, 30 min | < 0.10 | % | |
| Water Absorption (23°C, 24 hr) | < 3.8 | % | IPC TM-650 2.6.2 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882A | ||
| MD : Break | > 103 | MPa | |
| TD : Break | > 103 | MPa | |
| Tensile Elongation | ASTM D882A | ||
| MD : Break | > 40 | % | |
| TD : Break | > 40 | % |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity (200°C) | > 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength 1(in Air) | > 240 | kV/mm | ASTM D149 |
| Dielectric Constant (1 kHz) | < 3.90 | ASTM D150 | |
| Dissipation Factor (1 kHz) | < 3.5E-3 | ASTM D150 |
| Note Message | |
|---|---|
| 1 . | 500 V/sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SCHULAMID® 66 MV 2 | A. Schulman Europe | Nylon 66 | SCHULAMID® |
| TRISTAR® PC-10R-CL(V6) | Polymer Technology and Services, LLC | PC | TRISTAR® |
| UMG ABS® EX215 | UMG ABS, Ltd. | ABS | UMG ABS® |
| NuSil FS-3602 | NuSil Technology | Silicone | NuSil |
| Flontech® FT-1-1F | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
