Order Products : sales@su-jiao.com
Sumikon® PM-6330
| Category: | Phenolic , Phenolic |
| Manufacturer: | SBHPP |
| Trademark: | Sumikon® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HG4IyL_SumikonPM6330.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| SUMIKON PM-6330 Type J Black is a Short Glass fiber & Mineral molding compound based on Phenolic Novolac (TS) polymer. It is supplied in the form of Granular/Molding Powder for Molding. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.88 | g/cm³ | JIS K6911 |
| Molding Shrinkage - Flow | 0.11 | % | JIS K6911 |
| Water Absorption (Equilibrium) | 0.080 | % | JIS K6911 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 100 | MPa | JIS K6911 |
| Flexural Modulus | 15000 | MPa | JIS K6911 |
| Flexural Strength | 150 | MPa | JIS K6911 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 4.0 | kJ/m² | JIS K6911 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 300 | °C | JIS K6911 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Strength 1 | 9.0 | kV/mm | JIS K6911 |
| Insulation Resistance | JIS K6911 | ||
| -- 2 | 7.0E+12 | ohms | JIS K6911 |
| -- 3 | 9.0E+11 | ohms | JIS K6911 |
| Note Message | |
|---|---|
| 1 . | Method B (step by step) |
| 2 . | As molded |
| 3 . | After boiling |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2099 X 124790 E | RTP Company | PLA | RTP |
| RTP 3400-3 | RTP Company | LCP | RTP |
| Ravamid® R200 GF 30 | Ravago Group | Nylon 6 | Ravamid® |
| Zythane® 6070A | Alliance Polymers & Services | TPU-Polyether | Zythane® |
| CYCOLAC™ DL100 resin | SABIC Innovative Plastics Europe | ABS | CYCOLAC™ |
