Order Products : sales@su-jiao.com
EMOPLEN® CP MTF 10
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | EMAS Plastik San.Tic.AS. |
| Trademark: | EMOPLEN® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HFTGEn_EMOPLEN-CP-MTF-10.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Polypropylene copolymer %10 talcum filled |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 to 1.00 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 3.0 to 20 | g/10 min | ISO 1133 |
| Molding Shrinkage | 0.95 to 1.1 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 60 to 65 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2000 to 3000 | MPa | ISO 527-2 |
| Tensile Stress (Yield) | 20.0 to 35.0 | MPa | ISO 527-2 |
| Tensile Strain (Break) | > 15 | % | ISO 527-2 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact Strength | > 6.0 | kJ/m² | ISO 180/1A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 100 | °C | ISO 75-2/A |
| Vicat Softening Temperature | 95.0 | °C | ISO 306/B |
| Melting Temperature (DSC) | 160 | °C | ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SWANCOR Epoxy 901-35 | SWANCOR IND. CO., LTD. | Epoxy | SWANCOR Epoxy |
| TAROLOX 2050 W G6 | Taro Plast S.p.A. | PBT+PET | TAROLOX |
| Tarnoform® 300 WD | Grupa Azoty S.A. | Acetal (POM) Copolymer | Tarnoform® |
| Celanex® 2300 GV1/20 | Celanese Corporation | PBT | Celanex® |
| Laprene® 83E200A75 | SO.F.TER. SPA | SEBS | Laprene® |
