Order Products : sales@su-jiao.com
PRESEAL® TPE 6080
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Premix Oy |
| Trademark: | PRESEAL® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HFGOHQ_PRESEAL-TPE-6080.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| PRESEAL ® TPE 6080 is a novel thermoplastic elastomer based highly conductive compound intended primarily for EMI gasket applications. It may also find interesting uses as conductors or in grounding applications. Conductivity is achieved with silver-coated glass. PRESEAL ® TPE 6080 can be injection-moulded like an ordinary thermoplastic elastomer thus giving great new possibilities in gasket design and mass production. It has adhesion to selected thermoplastics and metal contacts are also arranged. This opens up interesting construction possibilities with co-injection moulding e.g. moulding the gasket directly in the phone casing. Recyclability is an added value. The material is silicone free. Typical applications include soft EMI gaskets in mobile phones, mobile phone base stations and other wireless communication environment as well as military application. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.85 | g/cm³ | ISO 1183 |
| Viscosity 1 | 75.0 | Pa·s |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Compression Modulus | ISO 7743 | ||
| At 10% compression | 0.0300 | MPa | |
| At 20% compression | 0.0500 | MPa |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shielding Effectiveness - 20 to 700 MHz 2 | 100 | dB |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore A) | 60 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flexural Modulus | 2.50 | MPa | ISO 178 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| Yield | 1.00 | MPa | |
| -- | 0.800 | MPa | |
| Tensile Elongation | |||
| Yield 3 | 28 | % | ASTM D412 |
| Break | 60 | % | ISO 37 |
| Tear Strength | 4.1 | kN/m | ISO 34-1 |
| Compression Set (85°C, 24 hr) | 26 | % | ISO 815 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity 4 | 0.010 | ohms·cm | Internal Method |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 | °C | |
| Drying Time | 3.0 | hr |
| Note Message | |
|---|---|
| 1 . | 200°C |
| 2 . | ARP 1705 |
| 3 . | ISO 37 |
| 4 . | Mil-G-83528 8 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rhelon G2918HU-01 | RheTech, Inc. | Nylon 66 | Rhelon |
| TROGAMID® CX CX7323 | Evonik Industries AG | Nylon, Unspecified | TROGAMID® CX |
| DIALAC® WH10 | UMG ABS, Ltd. | AES | DIALAC® |
| Rotuba CAB B9024 (10% Plasticizer) | Rotuba Extruders, Inc. | CAB | Rotuba CAB |
| Durethan® DP 2325 H3.0 000000 | LANXESS Asia/Pacific | Nylon 66 | Durethan® |
