Order Products : sales@su-jiao.com
RTP 4407 L
| Category: | Nylon, Unspecified , Polyamide |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HDu2v6_RTP-4407-L.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.51 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.18 mm, Injection Molded) | 0.20 to 0.30 | % | ASTM D955 |
| Water Absorption (23°C, 24 hr) | 0.40 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 125 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 13100 | MPa | ASTM D638 |
| Tensile Strength | 220 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 2.4 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 11700 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 303 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 140 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 850 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Injection Molded) | 271 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 304 to 332 | °C | |
| Middle Temperature | 304 to 332 | °C | |
| Front Temperature | 304 to 332 | °C | |
| Mold Temperature | 135 to 163 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shandong PP PG8301 | Shandong Dongchen Engineering Plastics Co., Ltd. | PP, Unspecified | Shandong PP |
| SITRALAC S20 black | SITRAPLAS GmbH | ABS | SITRALAC |
| VAMPLEN 1025 V2 | Vamp Tech | PP Homopolymer | VAMPLEN |
| NatureFlex™ NP 140 | Innovia Films Ltd. | Cellulose, Regenerated | NatureFlex™ |
| Dynacom CT-140MT | Dynachem Co. Ltd. | PP Copolymer | Dynacom |
