Order Products : sales@su-jiao.com
Maxxam™ FR PP CONC 36 NAT S
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Maxxam™ FR |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | HDnNo5_Maxxam-FR-PP-CONC-36-NAT-S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Maxxam™FR flame retardant polyolefin polymers and masterbatches meet the strict flammability requirements set by the industry, including UL 94V-2,V-0 and 5VA performance grades of UL Laboratory. In addition, the various polymers in the Maxxam FR combination are also suitable for high relative temperature index (RTI) levels. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 70 | g/10 min | ASTM D1238 |
| Additional Information |
|---|
| MAXXAM FR PO浓缩61给低密度和高密度聚乙烯带来良好的阻燃性。因为聚乙烯的种类太多，很难预测达到特定可燃性标准所需要的稀释比。对于起点配方我们建议：4-7份（重量）低密度聚乙烯，5份（重量）高密度聚乙烯-到1份普立万PE浓缩61。当此浓度以适当比例稀释时，制成材料可以达到与UL-94 V-2或VTM-2要求等效的阻燃性。对物理属性的影响最小。 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TROGAMID® T BX7304 | Evonik Industries AG | Nylon 6/3T | TROGAMID® T |
| Aplax P0050FN | Ginar Technology Co., LTD. | PP, Unspecified | Aplax |
| ExxonMobil™ LLDPE LL 6101 Series | ExxonMobil Chemical | LLDPE | ExxonMobil™ LLDPE |
| Flontech® FT-1-1O | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| EcoPaXX® Q-HG10 | DSM Engineering Plastics | Nylon 410 | EcoPaXX® |
