Order Products : sales@su-jiao.com
Andur AL 90 AP/Curene® 89LC
| Category: | PUR-Eth,aliphat , Polyurethane (Polyether, Aliphatic) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | H7VPmN_Andur-AL-90-AP-Curene-89LC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur AL 90 AP is a polyether (PTMG) based prepolymer terminated with an aliphatic isocyanate to improve color stability, hydrolytic stability, and give longer pot life. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore D) | 94 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 7.65 | MPa | ASTM D412 |
| 300% strain | 23.7 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 40.7 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 400 | % | ASTM D412 |
| Bayshore Resilience | 50 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 3.5 - 4.5 | min | |
| Demold Time (100°C) | 20 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore D: 92 to 95Die C Tear, ASTM D1004: 260 pliAverage Split Tear, ASTM D1938: 69 pliStoichiometry Curative Level: 95%Mix Temperature: Andur AL 90 AP: 180-210°F Curene 89LC: 72°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Shin-Etsu Elastomer FE-281U | Shin-Etsu Silicones of America | Fluoro Si | Shin-Etsu Elastomer |
| Cheng Yu NG1250S | Cheng Yu Plastic Company Limited | Nylon 66 | Cheng Yu |
| COSMOTHENE® G811 | TPC, The Polyolefin Company (Singapore) Pte Ltd | LDPE | COSMOTHENE® |
| DIOSHY® SP-595W | DIOSHY Co.,Ltd. | SEBS | DIOSHY® |
| Geon™ Vinyl Rigid Molding M3220 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
