Order Products : sales@su-jiao.com
EcoVid 43IMH
| Category: | PLA , Polylactic Acid |
| Manufacturer: | Greener Polymers Inc. |
| Trademark: | EcoVid |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | H7DDbr_EcoVid-43IMH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
EcoVid-43IMH is a General Purpose Ingeo PLA and bio-composite material blend suitable for Thermoforming processes with a High Heat resistance index. The material, rated for 178F/80°C and could be frozen to -32°C. Mould crystallization will increase the heat deflection from 80°C to 110°C+ depending on the application. Applications: EcoVid-43IMH Ingeo PLA composite may be used in a variety of applications involving heat resistant injection moulding products such as spoons, knives and forks, hot coffee cups, soup bowls, pre-cooked food trays, single use trays and disposable food platters. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.27 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | ASTM D1238 | ||
| 190°C/2.16 kg | 22 | g/10 min | ASTM D1238 |
| 210°C/2.16 kg | 80 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 - 0.50 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 130 | °C | ASTM D1525 |
| Melting Temperature | 130 - 180 | °C | ASTM D3418 |
| Additional Information |
|---|
| Vapour Barrier Transmission Rate (ASTM E380): 20.1636 (sd +/- 0.3537)Oxygen Permeability (ASTM E380): 53.481 (sd +/- 0.249) |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Hopper Temperature | 145 - 155 | °C | |
| Rear Temperature | 145 - 165 | °C | |
| Middle Temperature | 165 - 195 | °C | |
| Front Temperature | 165 - 195 | °C | |
| Nozzle Temperature | 165 - 180 | °C | |
| Back Pressure | 1.03 - 2.76 | MPa | |
| Screw Speed | 85 - 185 | rpm |
| Injection instructions |
|---|
| Mould Cycle Time: 19-35 secs |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| VALOX™ 771 resin | SABIC Innovative Plastics | PBT | VALOX™ |
| ALTECH® PA6 A 2030/319 GF30 IM | ALBIS PLASTIC GmbH | Nylon 6 | ALTECH® PA6 |
| ICORENE® 3560 DW | ICO Polymers EMEA, A Division of A. Schulman | LLDPE | ICORENE® |
| Lucopren® SB 1551-45FS | Lucobit AG | SBS | Lucopren® |
| ADENE® O05XGBG-02 | A.D. Compound S.p.A. | PP Copolymer | ADENE® |
