Order Products : sales@su-jiao.com

Pro-fax PH350

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	LyondellBasell Industries
Trademark:	Pro-fax
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	H6eXeE_Pro-fax-PH350.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Pro-fax PH350 general-purpose polypropylene homopolymer is available in spherical particle form. This resin has very minimal stabilization, which allows wide design latitude in compounding applications. Additional stabilization is required to protect the resin during melt processing and throughout its useful life. For regulatory compliance information see Pro-fax PH350 Product Stewardship Bulletin (PSB). Please note that any additives compounded into this resin will require a re-assessment of its FDA status.

Message

Pro-fax PH350 general-purpose polypropylene homopolymer is available in spherical particle form. This resin has very minimal stabilization, which allows wide design latitude in compounding applications. Additional stabilization is required to protect the resin during melt processing and throughout its useful life.

For regulatory compliance information see Pro-fax PH350 Product Stewardship Bulletin (PSB).

Please note that any additives compounded into this resin will require a re-assessment of its FDA status.

General Information
Features	General Purpose Good Stiffness Homopolymer
Uses	Compounding
Forms	Spheres
Processing Method	Compounding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.898	g/cm³	ASTM D792B
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	3.5	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	33.0	MPa	ASTM D638
Tensile Elongation (Yield)	12	%	ASTM D638
Flexural Modulus - 1% Secant ²	1380	MPa	ASTM D790A

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact (23°C)	53	J/m	ASTM D256A

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load (0.45 MPa, Unannealed)	88.0	°C	ASTM D648

Note Message
1 .	50 mm/min
2 .	1.3 mm/min

Resin Grade	Manufacturer	Category	Trademark
Shin-Etsu Elastomer KE-5560U	Shin-Etsu Silicones of America	Silicone Rubber, HTV	Shin-Etsu Elastomer
UBESTA 3020 X15	UBE Engineering Plastics, S.A.	Nylon 12	UBESTA
Boltaron 3015 TruPrint	Boltaron Performance Products	PVC, Rigid	Boltaron
Durolon® VR2000	Unigel Plásticos	PC	Durolon®
Hipolyene 5131 SX-5	Zylog Plastalloys	TPO (POE)	Hipolyene