Order Products : sales@su-jiao.com
ResMart Ultra SAN 9
| Category: | SAN , Styrene Acrylonitrile |
| Manufacturer: | ResMart |
| Trademark: | ResMart Ultra |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | H6GpsS_ResMart-Ultra-SAN-9.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High performance, Styrene Acrylonitrile (SAN) material for injection molding |
| General Information | |
|---|---|
| Agency Ratings |
|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.04 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (230°C/3.8 kg) | 9.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | 84 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 68.9 | MPa | ASTM D638 |
| Flexural Modulus | 3340 | MPa | ASTM D790 |
| Flexural Strength | 103 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm) | 16 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed) | 92.2 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 0.711 mm | HB | ||
| 1.50 mm | HB |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature - Desiccant Dryer | 82.2 | °C | |
| Drying Time - Desiccant Dryer | 2.0 | hr | |
| Processing (Melt) Temp | 238 to 277 | °C | |
| Mold Temperature | 51.7 to 82.2 | °C | |
| Injection Pressure | 68.9 to 96.5 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| PrimaFlex® HH 1600 | Plastic Solutions, Inc. | PS (Specialty) | PrimaFlex® |
| Miflon® 3114 | Jiangsu Meilan Chemical Co., Ltd. | PTFE | Miflon® |
| Titanvene™ HD5218EA | PT. TITAN Petrokimia Nusantara | HDPE | Titanvene™ |
| Bergamid™ PA66 C20 Black | PolyOne Corporation | Nylon 66 | Bergamid™ |
| E-FLEX™ S3050 | Mando Advanced Materials Co., Ltd. | TPE | E-FLEX™ |
