Order Products : sales@su-jiao.com
Elastamax™ HTE 3080
| Category: | PVC+NBR , Polyvinyl Chloride + NBR |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Elastamax™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | H2zzQ6_Elastamax-HTE-3080.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Elastamax™ HTE Series thermoplastic elastomers (TPEs) are based upon compounded blends of PVC resins and nitrile rubber. These elastomeric materials provide outstanding resistance to hydrocarbons and oils, offer excellent weatherability, and are an economical alternative to thermoset rubber and other more costly thermoplastic elastomers. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.33 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(190°C/5.0 kg) | 0.46 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 80 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2 | ASTM D638 | ||
| Break | 19.3 | MPa | |
| 100% Strain | 8.94 | MPa | |
| 300% Strain | 16.0 | MPa | |
| Tensile Elongation 3(Break) | 390 | % | ASTM D638 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tear Strength 4 | 57.6 | kN/m | ASTM D624 |
| Compression Set | ASTM D395A | ||
| 70°C, 22 hr | 46 | % | |
| 100°C, 22 hr | 52 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -49.0 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | Type IV, 510 mm/min |
| 3 . | Type IV, 510 mm/min |
| 4 . | Die C, 510 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTV-2 GI-1040 | Silicones, Inc. | Silicone Rubber, RTV-2 | RTV-2 |
| Rotec® ABS HF 5 | ROMIRA GmbH | ABS | Rotec® ABS |
| Kynar Flex® 2851-00 | Arkema | PVDF | Kynar Flex® |
| OmniLon™ PA6/6 U GR14 IM10 BK1000 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
| Braskem PP DH357.01 | Braskem Europe GmbH | PP Homopolymer | Braskem PP |
