Order Products : sales@su-jiao.com
UNISOFT TPE™ ST-90A-NT-4-01
| Category: | SEBS , Styrene Ethylene Butylene Styrene Block Copolymer |
| Manufacturer: | UNITED SOFT PLASTICS, Inc. |
| Trademark: | UNISOFT TPE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | H1nvAe_UNISOFT-TPE-ST-90A-NT-4-01.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| TPE Compound based on Styrene-Ethylene/Butylene-Styrene Block Copolymer |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.18 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 1.0 to 1.5 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 90 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 12.9 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 600 | % | ASTM D412 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 165 to 185 | °C | |
| Front Temperature | 185 to 205 | °C | |
| Nozzle Temperature | 205 to 225 | °C | |
| Mold Temperature | 30.0 to 65.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 170 | °C | |
| Cylinder Zone 3 Temp. | 190 | °C | |
| Cylinder Zone 5 Temp. | 200 | °C | |
| Die Temperature | 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALAMID® 6 HZ 4 | LEIS Polytechnik - polymere Werkstoffe GmbH | Nylon 6 | ALAMID® |
| Hostacom EP Q 40 RN/6 | LyondellBasell Industries | PP, Unspecified | Hostacom |
| OmniLon鈩?PA6/6 HSL | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
| Infino ASF-9810FM | LOTTE ADVANCED MATERIALS CO., LTD. | PBT | Infino |
| ULTEM™ AR9200 resin | SABIC Innovative Plastics | PEI | ULTEM™ |
