Order Products : sales@su-jiao.com
Ferro PP TPP15AN76BK
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Ferro Corporation |
| Trademark: | Ferro PP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GzeX0b_Ferro-PP-TPP15AN76BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Ferro PP TPP15AN76BK is a polypropylene homopolymer (PP Homopoly) material, which contains 15% talc filler. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific,. The main features of Ferro PP TPP15AN76BK are:
The typical application field of Ferro PP TPP15AN76BK is: automotive industry |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Recycled Content |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 72 | g/10 min | ISO 1133 |
| Molding Shrinkage | ISO 294-4 | ||
| Vertical flow direction | 1.8 | % | ISO 294-4 |
| Flow direction | 1.4 | % | ISO 294-4 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 27.6 | MPa | ISO 527-2 |
| Flexural Modulus | 1950 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ISO 180/A | ||
| -40°C | 1.7 | kJ/m² | ISO 180/A |
| 23°C | 2.9 | kJ/m² | ISO 180/A |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | 1.0 | % | ISO 188 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature | |||
| 0.45 MPa, not annealed | 115 | °C | ISO 75-2/B |
| 1.8 MPa, not annealed | 60.0 | °C | ISO 75-2/A |
| Additional Information |
|---|
| The values listed as Molding Shrinkage, ISO 294-4, were tested in accordance with ISO 2577.Heat Aging Performance (Izod Retention), ISO 188: -8% |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Thermoset Plastics DC-491 | Thermoset, Lord Chemical Products | Epoxy | Thermoset Plastics |
| THERMOLAST® K TF0STL (Series: FC/S) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Braskem EVA 3019 PE | Braskem | EVA | Braskem EVA |
| Calprene® 487 | Dynasol Elastomers | SBS | Calprene® |
| Hax™ HFX 521 | Fainplast Compounds S.r.l | Polyolefin, Unspecified | Hax™ |
