Order Products : sales@su-jiao.com
ADMER™ AT2539E
| Category: | MDPE , Medium Density Polyethylene |
| Manufacturer: | Mitsui Chemicals Europe GmbH |
| Trademark: | ADMER™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GyatgU_ADMER-AT2539E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ADMER® AT2539E is a maleic anhydride grafted MD-PE based adhesive designed for bonding to PE, EVOl—l, PA, Epoxy and metals. It offers advanced adhesion durability, high heat resistance and good processability in pipe coating, blow film and blow molding. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.937 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 3.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 57 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 16.0 | MPa | |
| Break | 22.0 | MPa | |
| Tensile Elongation (Break) | > 500 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Unnotched Izod Impact (Area) | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 110 | °C | ASTM D1525 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 175 X HB | RTP Company | PP, Unspecified | RTP |
| RTP 2585 HEC | RTP Company | PC+ABS | RTP |
| Sinpolene MBB2401 | Teknor Apex Asia Pacific PTE. LTD. | LLDPE | Sinpolene |
| NYCOA Polyamide 1637 W | Nycoa (Nylon Corporation of America) | Nylon 6 | NYCOA Polyamide |
| Moplen RP242G | LyondellBasell Industries | PP Homopolymer | Moplen |
