Order Products : sales@su-jiao.com
POLYCOMPO PE 12
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Gxhm6o_POLYCOMPO-PE-12.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
POLYCOMPO PE 12 is a Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific. Typical application: Film. Characteristics include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.927 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 3.0 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 59 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | 28.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 100 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 250 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 100 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 114 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sindustris PC GP1001HU | Sincerity Australia Pty Ltd. | PC | Sindustris PC |
| UMG ALLOY® CV701 | UMG ABS, Ltd. | ASA+PC | UMG ALLOY® |
| Cardia Biohybrid鈩?BL-M | Cardia Bioplastics™ | TPS+PP | Cardia Biohybrid™ |
| HiFill® PA6/6 GB20 L | Techmer Engineered Solutions | Nylon 66 | HiFill® |
| OnForce™ LFT NN-40LCF/001 Grey | PolyOne Corporation | Nylon 66 | OnForce™ LFT |
