Order Products : sales@su-jiao.com
RTP 1200 S-75A
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GxZywB_RTP-1200-S-75A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| RTP 1200 S-75A is a thermoplastic polyurethane elastomer (polyester)(TPU-polyester) material,. This product is available in North America, Africa and the Middle East, Latin America, Europe or Asia Pacific. The processing method is injection molding. |
| General Information | |
|---|---|
| RoHS Compliance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow (3.20 mm) | 0.50 - 0.90 | % | ASTM D955 |
| Moisture Content | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 10 sec) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 50% strain, 3.18mm 1 | 2.96 | MPa | ASTM D412 |
| 100% strain, 3.18mm 2 | 4.69 | MPa | ASTM D412 |
| 300% strain, 3.18mm 3 | 9.65 | MPa | ASTM D412 |
| Tensile Strength 4(Break, 3.20 mm) | 37.2 | MPa | ASTM D412 |
| Tensile Elongation 5(Break) | 470 | % | ASTM D412 |
| Tear Strength 6 | 120 | kN/m | ASTM D624 |
| Compression Set 7(23°C, 22 hr) | 25 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 | °C | |
| Drying Time | 4.0 | hr | |
| Processing (Melt) Temp | 199 - 216 | °C | |
| Mold Temperature | 26.7 - 65.6 | °C | |
| Injection Pressure | 68.9 - 103 | MPa |
| Injection instructions |
|---|
| Desiccant Type Dryer Required. |
| Note Message | |
|---|---|
| 1 . | C mold, 510mm/min |
| 2 . | Mouth die C, 510mm/min |
| 3 . | C mold, 510mm/min |
| 4 . | C mold, 500 mm/min |
| 5 . | Mouth die C, 500 mm/min |
| 6 . | C mould |
| 7 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SOLLAMID B 2700 FV 10 | Krisoll Resinas Plásticas Ltda. | Nylon 6 | SOLLAMID |
| Toler PE PE3953 | Toler Chemical, Inc | HDPE | Toler PE |
| Wellamid® FR22F-NBK3 | Wellman Engineering Resins | Nylon 66 | Wellamid® |
| LUVOCOM® 1-8843 | Lehmann & Voss & Co. | Nylon 66 | LUVOCOM® |
| Telcar® TL-2417J NAT | Teknor Apex Company | TPE | Telcar® |
