Order Products : sales@su-jiao.com
NEOPLAST 155 FT SWB
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Zylog Plastalloys |
| Trademark: | NEOPLAST |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GtwRCG_NEOPLAST-155-FT-SWB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Neoplast 155 FT SWB is a soft, dynamically vulcanized thermoplastic vulcanizate (TPV), based on polyolefin chemistry, and is intended for Injection Moulding and Extrusion applications. Key Features: Passes cytotoxicity requirement for use in medical applications |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.960 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec, 23°C) | 58 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(100% Strain) | 3.43 | MPa | ASTM D412 |
| Tensile Strength 2(Break) | 4.90 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 250 | % | ASTM D412 |
| Tear Strength 4 | 21.6 | kN/m | ASTM D624 |
| Compression Set (70°C, 22 hr) | 32 | % | ASTM D395B |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (150°C, 168 hr) | 12 | % | ASTM D573 |
| Change in Ultimate Elongation in Air (150°C, 168 hr) | -15 | % | ASTM D573 |
| Change in Durometer Hardness in Air (150°C, 168 hr) | 2.0 | ASTM D573 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Continuous Use Temperature | 125 | °C | SAE J2236 |
| Brittleness Temperature | -60.0 | °C | ASTM D746 |
| Note Message | |
|---|---|
| 1 . | 500 mm/min |
| 2 . | 500 mm/min |
| 3 . | 500 mm/min |
| 4 . | 500 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| THERMOLAST® K TF7AAC (Series: FC/HE/tl) | KRAIBURG TPE | TPE | THERMOLAST® K |
| Arak LLDPE BD2450AA | Shazand (Arak) Petrochemical Corporation | LLDPE | Arak LLDPE |
| Geon™ Vinyl Rigid Extrusion 87707 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Extrusion |
| Generic PE Copolymer | Generic | PE Copolymer | Generic |
| ENFLEX VL-120-85A | Ravago Group | PP+EPDM | ENFLEX |
