Order Products : sales@su-jiao.com
Zelux® M
| Category: | PC , Polycarbonate |
| Manufacturer: | Westlake Plastics Company |
| Trademark: | Zelux® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GsahzB_Zelux-M.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Zelux polycarbonate is an engineering plastic with excellent dimensional stability and good strength and stiffness over a wide range of service temperatures. Zelux is often used for structural applications when clarity and impact strength are essential including lenses, manifolds, site glasses, and machine guards. Zelux is used for a wide variety of electrical applications since it has low moisture absorption, good insulating properties, and an excellent flammability rating. Zelux is easy to fabricate, paint, and glue. Applications Include:
Advantages of Zelux®
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.20 | g/cm³ | ASTM D792 |
| Water Absorption | ASTM D570 | ||
| 24 hr | 0.15 | % | |
| Equilibrium | 0.35 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness | ASTM D785 | ||
| M-Scale | 70 to 78 | ||
| R-Scale | 118 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D638 | ||
| Yield | 57.9 | MPa | |
| Break | 65.5 | MPa | |
| Tensile Elongation | ASTM D638 | ||
| Yield | 7.0 | % | |
| Break | 110 | % | |
| Flexural Modulus | 2340 | MPa | ASTM D790 |
| Flexural Strength (Yield) | 93.1 | MPa | ASTM D790 |
| Compressive Strength | 86.2 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (3.18 mm) | No Break | ASTM D256 | |
| Notched Izod Impact | 850 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 138 | °C | |
| 1.8 MPa, Unannealed | 135 | °C | |
| CLTE - Flow | 6.8E-5 | cm/cm/°C | ASTM D696 |
| Thermal Conductivity | 0.19 | W/m/K | ASTM C177 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+17 | ohms·cm | ASTM D257 |
| Dielectric Strength | 15 | kV/mm | ASTM D149 |
| Dielectric Constant | ASTM D150 | ||
| 60 Hz | 2.90 | ||
| 1 MHz | 2.90 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (11.5 mm) | V-0 | UL 94 |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 0.50 to 2.0 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Quantum Composites QCI-15G | Quantum Composites Inc. | PI, TP | Quantum Composites |
| ColorRx® PSU-1000RX | LTL Color Compounders, Inc. | PSU | ColorRx® |
| ESTASTIR HI 0810 V0 | Cossa Polimeri S.r.l. | PS (HIPS) | ESTASTIR |
| Geon™ BIO RA9000 | PolyOne Corporation | PVC, Flexible | Geon™ BIO |
| Elastocon® 8055BX | Elastocon TPE Technologies | TPE | Elastocon® |
