Order Products : sales@su-jiao.com
CELEX™ 310HF
| Category: | PC , Polycarbonate Resin |
| Manufacturer: | Trinseo |
| Trademark: | CELEX™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GqtWu4_CELEX-310HF.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| CELEX 310HF is an ignition resistant and glass fiber reinforced polycarbonate resin. It is formulated without the use of brominated and chlorinated flame retardant. CELEX 310HF is designed with superior processability for use in LCD frame and instrument panel. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.24 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (300°C/1.2 kg) | 19 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.30 to 0.50 | % | ASTM D955 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 3.20 mm, Injection Molded) | 69.0 | MPa | ASTM D638 |
| Tensile Elongation (Break, 3.20 mm, Injection Molded) | 5.0 | % | ASTM D638 |
| Flexural Modulus (3.20 mm, Injection Molded) | 3390 | MPa | ASTM D790 |
| Flexural Strength (3.20 mm, Injection Molded) | 88.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 80 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 3.20 mm, Injection Molded) | 120 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating 1(1.60 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 120 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 260 to 265 | °C | |
| Middle Temperature | 265 to 270 | °C | |
| Front Temperature | 270 to 275 | °C | |
| Nozzle Temperature | 275 to 280 | °C | |
| Mold Temperature | 80.0 to 120 | °C |
| Note Message | |
|---|---|
| 1 . | This rating not intended to reflect hazards presented by this or any other material under actual fire conditions. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Makrolon® 2467 | Covestro - Polycarbonates | PC | Makrolon® |
| S&E Wire & Cable GA-509ORLT All Colors | S&E Specialty Polymers, LLC | PVC, Unspecified | S&E Wire & Cable |
| Mirathane™ H120 | Miracll Chemicals Co., Ltd. | TPU, Unspecified | Mirathane™ |
| ISOPAK® 525 | Great Eastern Resins Industrial Co Ltd (GRECO) | ABS | ISOPAK® |
| Plastiglas Sensacryl® Ultra | Plastiglas de Mexico S.A de C.V. | Acrylic, Unspecified | Plastiglas |
