Order Products : sales@su-jiao.com
Dow ENDURANCE™ HFDA-9563 BK
| Category: | PE, Unspecified , Semiconductive Shielding |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | Dow ENDURANCE™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GqryT6_Dow-ENDURANCE-HFDA-9563-BK.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
DOW ENDURANCE™ HFDA-9563 BK is a cross-linkable semiconductive polyethylene designed for conductor and bonded insulation shielding of power cables, which meets the requirements of AEIC CS 5-87, AEIC CS 7-87, ICEA S-66-524 and IEC 60840. It has the following important advantages. 1. Super smooth extruded surface 2. Good scorch resistance 3. Strong adhesion to insulation layer 4. Good thermal stability 5. Excellent electric conductivity |
| General Information | |
|---|---|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) 1(190°C/21.6 kg) | 12 | g/10 min | ASTM D1238 |
| Environmental Stress-Cracking Resistance | > 200 | hr | ASTM D1693 |
| Degree of Crosslinking 2 | > 75 | % | ASTM D2765A |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile strength retention- 168 hrs (150°C) 3 | > 85 | % | ASTM D638 |
| Elongation retention rate- 168 hrs (150°C) 4 | > 85 | % | ASTM D638 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| MDR 5 | Internal method | ||
| Tmax : 180°C | J | Internal method | |
| TS2 : 180°C | > 2.0 | min | Internal method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 53 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 6 | 13.0 | MPa | ASTM D638 |
| Tensile Elongation 7(Break) | 220 | % | ASTM D638 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -40.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity 8 | ASTM D991 | ||
| 23°C | 15 | ohms·cm | ASTM D991 |
| 90°C | 1.5E+2 | ohms·cm | ASTM D991 |
| Extrusion instructions |
|---|
| Recommended Extrusion Conditions Barrel: 100 - 115°C Head: 120°C Compound at Die: 120 - 130°C DOW ENDURANCE™ HFDA-9563 BK is a cross-linkable product and thus requires an extrusion stock temperature in the range of 120 -130 deg.C to avoid precure. Specific processing conditions can be determined only by trials on individual processing equipment.Dehumidified hopper drying at 60 deg.C for 4hours may be employed to remove moisture prior to extrusion. |
| Note Message | |
|---|---|
| 1 . | without peroxide |
| 2 . | Curing Condition: 180°C, 25min |
| 3 . | Curing Condition: 180°C, 25min |
| 4 . | Curing Condition: 180°C, 25min |
| 5 . | Curing Condition: 180°C, 25min |
| 6 . | Curing Condition: 180°C, 25min |
| 7 . | Curing Condition: 180°C, 25min |
| 8 . | Curing Condition: 180°C, 25min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Starflam PK0052E | Eurostar Engineering Plastics | Nylon 6 | Starflam |
| DOW™ LDPE 640S | The Dow Chemical Company | LDPE | DOW™ LDPE |
| Bergamid™ B700 G50 H | PolyOne Corporation | Nylon 6 | Bergamid™ |
| Arnite® TV4 241 SL | DSM Engineering Plastics | PBT | Arnite® |
| K PP 11001 | Technovinyl Polymers India Ltd. | TPO | K PP |
