Order Products : sales@su-jiao.com
Moplen HP563S
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | PolyMirae |
| Trademark: | Moplen |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GoM9bL_Moplen-HP563S.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Moplen HP563S is the controlled rheology polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP563S is a homopolymer typically used in spunbonded nonwovens. Moplen HP563S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.900 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 38 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 98 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, Injection Molded) | 37.3 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 8.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 1470 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Injection Molded) | 29 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed, Injection Molded) | 100 | °C | ASTM D648 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNO ABS 810 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
| ALTECH® PP-H B 2030/156 GF30 | ALBIS PLASTIC GmbH | PP Homopolymer | ALTECH® PP-H |
| Braskem PE STS7006 | Braskem America Inc. | LDPE | Braskem PE |
| INEOS HDPE K50-10-136 | INEOS Olefins & Polymers USA | HDPE Copolymer | INEOS HDPE |
| NILAMID® XS3 GF20 | Nilit Plastics | Nylon, Unspecified | NILAMID® |
