Order Products : sales@su-jiao.com
Halene H M5818
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Haldia Petrochemicals Ltd. |
| Trademark: | Halene H |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GoIu2A_Halene-H-M5818.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
M5818 is an Injection Molding Grade HDPE produced by Mitsui CX Technology. This resin is particularly recommended for general-purpose Injection Molded items. M5818 combines excellent processability with good mechanical properties. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density 1 | 0.956 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 19 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 64 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, Compression Molded) | 24.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break, Compression Molded) | 350 | % | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, Compression Molded) | 36 | J/m | ASTM D256A |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Peak Melting Temperature | 131 | °C | ASTM D3418 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 180 to 235 | °C | |
| Middle Temperature | 180 to 235 | °C | |
| Front Temperature | 180 to 235 | °C | |
| Nozzle Temperature | 235 | °C |
| Note Message | |
|---|---|
| 1 . | 23°C |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Wanthane® WHT-1598 | Wanhua Chemical Group Co., Ltd. | TPU-Polyester | Wanthane® |
| Vyncolit® E 8705 | Vyncolit N.V. | Epoxy | Vyncolit® |
| Utomer UT380 | Shanghai Utomer Material Science Co., Ltd. | TPU-Polyester | Utomer |
| Axiall PVC 1802 Clear 7070 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Durethan® BKV 130 DUS008 901510 | LANXESS GmbH | Nylon 6 | Durethan® |
