Order Products : sales@su-jiao.com
Network Polymers LDPE 10 0218
| Category: | EVA , Ethylene Vinyl Acetate Copolymer |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Network Polymers LDPE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Gnl3Dt_Network-Polymers-LDPE-10-0218.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Network Polymers LDPE 10 0218 is an Ethylene Vinyl Acetate Copolymer (EVA) product. It is available in North America. Typical application: Food Contact Applications. |
| General Information | |
|---|---|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.941 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) 1(190°C/2.16 kg) | 2.5 | g/10 min | ASTM D1238 |
| Vinyl Acetate Content | 18.0 | wt% |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shore A | 90 | ||
| Shore D | 40 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 17.9 | MPa | ASTM D638 |
| Tensile Elongation (Break) | 750 | % | ASTM D638 |
| Flexural Modulus 2(Injection Molded) | 44.1 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Impact Strength | ASTM D1822 | ||
| -20°C | 483 | kJ/m² | |
| 23°C | 557 | kJ/m² |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | < -98.3 | °C | ASTM D746 |
| Vicat Softening Temperature | 63.9 | °C | ASTM D1525 3 |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| 2 . | Method I (3 point load) |
| 3 . | Rate A (50°C/h) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ROMPETROL PP XCI-25 | ROMPETROL PETROCHEMICALS S.R.L. | PP Impact Copolymer | ROMPETROL PP |
| SOLARENE DM100 | Dongbu Hannong Chemical | PS (GPPS) | SOLARENE |
| Trilliant™ HC X HC5200-0025 RS Natural | PolyOne Corporation | PP Copolymer | Trilliant™ HC |
| ACRYLITE® LED 8N LD12 | Evonik Cyro LLC | Acrylic (PMMA) | ACRYLITE® |
| EPAMOULD 665A56 | Epaflex Polyurethanes S.R.L. | TPU-Polyester | EPAMOULD |
