Order Products : sales@su-jiao.com
REVOLVE® N-332
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Matrix Polymers |
| Trademark: | REVOLVE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GnfG6G_REVOLVE-N-332.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Revolve N-332 is a rotational moulding low density polyethylene grade. It has been designed to provide wide processing window, excellent toughness without compromising impact strength and mouldability. The grade is UV8 stabilised and it has outstanding ESCR. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.920 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 3.2 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | > 1000 | hr | |
| 100% Igepal | > 1000 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 10.5 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 250 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| ARM Impact (-40°C, 3.00 mm) | 11.3 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (0.45 MPa, Unannealed) | 45.0 | °C | ISO 75-2/B |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tecolen® HP30 NL XA80 | Eurotec Engineering Plastics | PP Homopolymer | Tecolen® |
| VITAMIDE® AR12 | A. Schulman Europe | Nylon 66 | VITAMIDE® |
| 4MID® 9A22160 | 4Plas | Nylon 66 | 4MID® |
| Flontech® FT-GR15-3 | Guarniflon S.p.A. - Flontech Division | PTFE | Flontech® |
| Greenflex® FD 20 | Versalis S.p.A. | EVA | Greenflex® |
