Order Products : sales@su-jiao.com
FLEXITEQ™ F87A100UV
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Marplex Australia Pty. Ltd. |
| Trademark: | FLEXITEQ™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Gndkri_FLEXITEQ-F87A100UV.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| FLEXITEQ™ F87A100UV is a formulation based on Santoprene™ rubber technology. It is formulated to incorporate smooth-touch and good mouldability properties. FLEXITEQ™ F87A100UV is a UV improved version and can be used in moulding applications on conventional thermoplastic equipment for injection moulding. It is polyolefin based and completely recyclable. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.958 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 90 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Break) | 9.50 | MPa | ASTM D412 |
| Tensile Elongation 2(Break) | 460 | % | ASTM D412 |
| Tear Strength 3(23°C) | 52.0 | kN/m | ASTM D624 |
| Compression Set 4(23°C, 70 hr) | 47 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 to 85.0 | °C | |
| Drying Time | 3.0 to 4.0 | hr | |
| Rear Temperature | 170 to 190 | °C | |
| Middle Temperature | 180 to 210 | °C | |
| Front Temperature | 200 to 220 | °C | |
| Processing (Melt) Temp | 190 to 230 | °C | |
| Mold Temperature | 10.0 to 60.0 | °C | |
| Injection Rate | Fast | ||
| Back Pressure | 0.300 to 0.700 | MPa | |
| Screw Speed | 100 to 200 | rpm | |
| Clamp Tonnage | 3.0 to 5.0 | kN/cm² |
| Note Message | |
|---|---|
| 1 . | Die C, 500 mm/min |
| 2 . | Die C, 500 mm/min |
| 3 . | Die C, 500 mm/min |
| 4 . | Type 2 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 881 TFE 18 SI 2 | RTP Company | Acetal (POM) Copolymer | RTP |
| Sangel® WAF100 | Unigel Plásticos | SAN | Sangel® |
| TRISTAR® PC-05GFR | Polymer Technology and Services, LLC | PC | TRISTAR® |
| New-prene™ 8680B | Total Polymer Vision (Suzhou) Co., LTD | PP+EPDM | New-prene™ |
| Geon™ Vinyl Rigid Molding M3400 | PolyOne Corporation | PVC, Rigid | Geon™ Vinyl Rigid Molding |
