Order Products : sales@su-jiao.com
Geon™ Vinyl Rigid Molding 6957
| Category: | PVC, Rigid , Rigid Polyvinyl Chloride |
| Manufacturer: | PolyOne Corporation |
| Trademark: | Geon™ Vinyl Rigid Molding |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Gn3iG0_Geon-Vinyl-Rigid-Molding-6957.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Geon™ Vinyl Rigid Molding 6957 is a Rigid Polyvinyl Chloride product. It is available in Africa & Middle East, Asia Pacific, Europe, Latin America, or North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.36 | g/cm³ | ASTM D792 |
| Spiral Flow | 55.9 | cm | |
| Molding Shrinkage - Flow | 0.20 to 0.50 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 78 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 2450 | MPa | ASTM D638 |
| Tensile Strength 2(Yield) | 37.9 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 25 | % | ASTM D638 |
| Flexural Modulus | 2520 | MPa | ASTM D790 |
| Flexural Strength | 73.1 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256A | ||
| -18°C, 3.18 mm, Injection Molded | 270 | J/m | |
| 0°C, 3.18 mm, Injection Molded | 530 | J/m | |
| 23°C, 3.18 mm, Injection Molded | 1100 | J/m |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, 6.35 mm | 68.9 | °C | |
| 0.45 MPa, Annealed, 6.35 mm | 72.2 | °C | |
| 1.8 MPa, Unannealed, 6.35 mm | 67.2 | °C | |
| 1.8 MPa, Annealed, 6.35 mm | 70.0 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.47 mm, GY) | V-0 | UL 94 | |
| CSA Flammability 4(1.53 mm) | V-0 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 199 to 210 | °C |
| Note Message | |
|---|---|
| 1 . | Type I, 51 mm/min |
| 2 . | Type I, 51 mm/min |
| 3 . | Type I, 5.1 mm/min |
| 4 . | Gray |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| REXtac® APAO RT 4535 | Huntsman Corporation | PAO | REXtac® APAO |
| Ultramid® T 4381 LDS | BASF Corporation | Nylon 6/6T | Ultramid® |
| Geon™ Vinyl Flexible A90FU | PolyOne Corporation | PVC, Flexible | Geon™ Vinyl Flexible |
| KOPLA PA66 KDG1070F | KOPLA Co., Ltd. | Nylon 66 | KOPLA PA66 |
| Sylvin 4200-88UV Orange 5104 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
