Order Products : sales@su-jiao.com
OnFlex™ S HS 70A-3E2543
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | PolyOne Corporation |
| Trademark: | OnFlex™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GkiIS1_OnFlex-S-HS-70A-3E2543.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| OnFlex™-S EH thermoplastic elastomer polymer is mixed with hydrogenated styrene block copolymer. In addition to having OnFlex™The main characteristics of-S products, such as high hardness, good mechanical properties, good processability, good coloring properties, and a large operating temperature range, this series of polymers has excellent cost performance. OnFlex™-S EH polymer is filled with other substances, so it is opaque and has a relatively high density. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.00 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 70 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ISO 37 | ||
| Lateral flow : fracture, 2.00mm 1 | 11.1 | MPa | ISO 37 |
| Traffic : fracture, 2.00mm 2 | 7.20 | MPa | ISO 37 |
| Traffic : fracture, 2.00mm 3 | 10.9 | MPa | ISO 37 |
| Tensile Elongation | ISO 37 | ||
| Lateral flow : fracture, 2.00mm 4 | 560 | % | ISO 37 |
| Traffic : fracture, 2.00mm 5 | 420 | % | ISO 37 |
| Traffic : fracture, 2.00mm 6 | 590 | % | ISO 37 |
| Additional Information | Nominal Value | ||
|---|---|---|---|
| General Material Type | Styrene thermoplastic elastomers (TES) | ||
| 各项属性值是采用注射模制基板测量得出。 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 180 - 220 | °C | |
| Mold Temperature | 30.0 - 60.0 | °C | |
| Injection Rate | Fast |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 170 | °C | |
| Cylinder Zone 2 Temp. | 180 | °C | |
| Cylinder Zone 3 Temp. | 190 | °C | |
| Die Temperature | 190 - 200 | °C |
| Note Message | |
|---|---|
| 1 . | Injection molded |
| 2 . | Injection molded |
| 3 . | Extruded |
| 4 . | Injection molded |
| 5 . | Injection molded |
| 6 . | Extruded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYMAN® (ABS) LP 126/2 GL | A. Schulman Europe | ABS | POLYMAN® |
| RTP 100 SI 2 HF | RTP Company | PP Homopolymer | RTP |
| SILVER® PET840G30 | Guangdong Silver Age Sci & Tech. Co., Ltd | PET | SILVER® |
| ASTALOY™ PC/ABS EHA | Marplex Australia Pty. Ltd. | PC+ABS | ASTALOY™ |
| Daploy™ SF313HMS | Borealis AG | PP Copolymer | Daploy™ |
