Order Products : sales@su-jiao.com

ASI POLYPROPYLENE 1667-01

Category:	PP Homopolymer , Polypropylene Homopolymer
Manufacturer:	A. Schulman Inc.
Trademark:	ASI POLYPROPYLENE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GkZKQt_ASI-POLYPROPYLENE-1667-01.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message
PP 1667-01 is an easy flowing natural homopolymer polypropylene. It is for injection molding large parts with thin sections requiring good stiffness, heat resistance, and chemical resistance. This product is compliance with the FDA requirements of 21 CFR 177.1520.

General Information
Features	Food Contact Acceptable Good Chemical Resistance Good Flow Good Stiffness High Heat Resistance Homopolymer
Uses	Thin-walled Parts
Agency Ratings	FDA 21 CFR 177.1520
Appearance	Natural Color
Forms	Pellets
Processing Method	Compounding Injection Molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.900	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	25	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	32.4	MPa	ASTM D638
Tensile Elongation (Yield)	10	%	ASTM D638
Flexural Modulus	1500	MPa	ASTM D790

Impact	Nominal Value	Unit	Test Method
Notched Izod Impact	27	J/m	ASTM D256

Thermal	Nominal Value	Unit	Test Method
Deflection Temperature Under Load			ASTM D648
0.45 MPa, Unannealed	102	°C
1.8 MPa, Unannealed	60.0	°C

Note Message
1 .	51 mm/min

Resin Grade	Manufacturer	Category	Trademark
PROTEQ™ C19UST32	Marplex Australia Pty. Ltd.	PP Copolymer	PROTEQ™
Moplen EP336J	LyondellBasell Industries	PP Impact Copolymer	Moplen
Bergamid™ A70 G30 WR NC103	PolyOne Corporation	Nylon 66	Bergamid™
Daelim Po1y® HX-250BL	DAELIM INDUSTRIAL CO., LTD.	HDPE	Daelim Po1y®
Kazan HDPE 293-4-7O1K	Kazanorgsintez Joint Stock Company	HDPE	Kazan HDPE