Order Products : sales@su-jiao.com
Network Polymers SAN 250
| Category: | SAN , Styrene Acrylonitrile |
| Manufacturer: | Network Polymers, Inc. |
| Trademark: | Network Polymers SAN |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GiiVaD_Network-Polymers-SAN-250.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Network Polymers SAN 250 is a Styrene Acrylonitrile (SAN) product. It can be processed by injection molding and is available in North America. Primary characteristic: flame rated. |
| General Information | |
|---|---|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.07 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) 1(200°C/5.0 kg) | 0.90 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow | 0.20 to 0.60 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 122 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 80.7 | MPa | ASTM D638 |
| Flexural Modulus | 3580 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 6.40 mm) | 11 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, 6.40 mm) | 91.1 | °C | ASTM D648 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.50 mm) | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 to 82.2 | °C | |
| Drying Time | 2.0 to 4.0 | hr | |
| Suggested Shot Size | 40 to 75 | % | |
| Rear Temperature | 160 to 182 | °C | |
| Middle Temperature | 182 to 221 | °C | |
| Front Temperature | 193 to 232 | °C | |
| Nozzle Temperature | 193 to 232 | °C | |
| Processing (Melt) Temp | 193 to 216 | °C | |
| Mold Temperature | 26.7 to 76.7 | °C | |
| Injection Pressure | 0.414 to 7.58 | MPa | |
| Injection Rate | Moderate-Fast | ||
| Back Pressure | 0.517 to 1.03 | MPa | |
| Clamp Tonnage | 2.8 to 4.1 | kN/cm² |
| Note Message | |
|---|---|
| 1 . | Procedure A |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| DOW™ LDPE 640S | The Dow Chemical Company | LDPE | DOW™ LDPE |
| Ducor® 1184 L | Ducor Petrochemicals BV | PP Homopolymer | Ducor® |
| LUVOCOM® 1850-1120/L | Lehmann & Voss & Co. | PBT | LUVOCOM® |
| PLYADECK PF-570/E570 | DIC Corporation | PUR, Unspecified | PLYADECK |
| CYCOLOY™ CY6110 resin | SABIC Innovative Plastics Europe | PC+ABS | CYCOLOY™ |
