Order Products : sales@su-jiao.com
Tool-A-Thane UT-35
| Category: | PUR, Unspecified , Polyurethane |
| Manufacturer: | Urethane Tooling & Engineering Corp |
| Trademark: | Tool-A-Thane |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Gh0eua_Tool-A-Thane-UT-35.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Specific Gravity | 1.22 | g/cm³ | |
| Molding Shrinkage - Flow | 1.5 | % |
| Hardness | Nominal Value | Unit | |
|---|---|---|---|
| Durometer Hardness | |||
| Shore A | 80 | ||
| Shore D | 32 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Coefficient of Friction 1(vs. Steel - Dynamic) | 0.80 | ||
| Abrasion Resistance - NBS Index | 110 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Graves Tear | 78.8 | kN/m |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Bayshore Resistance - NBS Index | 38.0 | ||
| Penetration Depth - Recommended for optimum life | 35 | % |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | |||
| 100% Strain | 4.24 | MPa | |
| 300% Strain | 8.00 | MPa | |
| Tensile Strength | 45.5 | MPa | |
| Tensile Elongation (Break) | 650 | % | |
| Tear Strength (Split) | 22 | kN/m | ASTM D470 |
| Compression Set 2(70°C, 22 hr) | 38 | % |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Brittleness Temperature | -67.8 | °C |
| Note Message | |
|---|---|
| 1 . | at 20 lbs load at 52 fpm |
| 2 . | Method B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Stylac™ 183 | Asahi Kasei Chemicals Corporation | ABS | Stylac™ |
| Mylar® WC (200 guage) | DuPont Teijin Films U.S. | PET | Mylar® |
| Sumikon® PM-6280 | SBHPP | Phenolic | Sumikon® |
| Sylvin 5150-65 Grey 9422 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Durethan® BKV 130 CS DUS008 600091 | LANXESS GmbH | Nylon 6 | Durethan® |
