Order Products : sales@su-jiao.com
Marlex® 9346
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Chevron Phillips Chemical Company LLC |
| Trademark: | Marlex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GgTVDe_Marlex-9346.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Marlex® 9346 is a High Density Polyethylene material. It is available in Latin America or North America for extrusion or pipe extrusion. Primary attribute of Marlex® 9346: Good Toughness. Typical applications include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.948 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/21.6 kg) | 9.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield, Compression Molded) | > 24.0 | MPa | ASTM D638 |
| Tensile Elongation 2(Break, Compression Molded) | 800 | % | ASTM D638 |
| Flexural Modulus - 2% Secant 3(Compression Molded) | 900 | MPa | ASTM D790 |
| Hydrostatic Design Basis | ASTM D2837 | ||
| 23°C | 11.0 | MPa | |
| 60°C | 6.90 | MPa |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| PENT | > 500 | hr | ASTM F1473 |
| Note Message | |
|---|---|
| 1 . | Type IV, 51 mm/min |
| 2 . | Type IV, 51 mm/min |
| 3 . | 13 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sanren F850EA (On-spec.) | SINOPEC Shanghai Petrochemical Co. Ltd. | PP Homopolymer | Sanren |
| TECHNO ABS F1350 | Techno Polymer Co, Ltd. | ABS | TECHNO ABS |
| Elastollan® LP 9277 | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| LEXAN™ LUX9612 resin | SABIC Innovative Plastics Asia Pacific | PC | LEXAN™ |
| RTP 2099 X 141518 A | RTP Company | PC+Polyester | RTP |
