Order Products : sales@su-jiao.com
HIPEX® HX6ICN (Series: HTR/OR)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | KRAIBURG TPE |
| Trademark: | HIPEX® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GgHONv_HIPEX-HX6ICN-Series-HTR-OR-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
The HTR/OR Series is your material solution for applications requiring high temperature and oil resistance. Typical applications
Material advantages
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.10 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 58 | ISO 7619 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(Yield) | 5.00 | MPa | ISO 37 |
| Tensile Elongation 2(Break) | 300 | % | ISO 37 |
| Tear Strength | 14 | kN/m | ISO 34-1 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 30 | % | ISO 815 |
| 70°C, 24 hr | 54 | % | ISO 815 |
| 100°C, 24 hr | 58 | % | ISO 815 |
| 120°C, 24 hr | 64 | % | ISO 815 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 105 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | 0.050 | % | |
| Rear Temperature | 210 | °C | |
| Middle Temperature | 220 | °C | |
| Front Temperature | 230 | °C | |
| Mold Temperature | 40.0 - 60.0 | °C | |
| Injection Pressure | 120 - 200 | MPa | |
| Back Pressure | 2.00 - 5.00 | MPa |
| Injection instructions |
|---|
| Hot Runner Temperature: 180 - 220°CThe runner should be empty after a maximum of 2 - 3 shots. |
| Note Message | |
|---|---|
| 1 . | Type S2, 200 mm/min |
| 2 . | Type S2, 200 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Unichem 6911X | Colorite Polymers | PVC, Unspecified | Unichem |
| 3M™ Dyneon™ Fluoroplastic PFA 6502UHPZ | 3M Advanced Materials Division | PFA | 3M™ Dyneon™ Fluoroplastic |
| Hangzhou Plastic PS/PVDC | Hangzhou Plastic Industry Co., Ltd. | Film, PS/PVDC | Hangzhou Plastic |
| KOPLA PP KPE1010 | KOPLA Co., Ltd. | PP, Unspecified | KOPLA PP |
| Kynar® 8601 | Arkema | Plastics Additive, Other | Kynar® |
