Order Products : sales@su-jiao.com
Spartech Polycom SCR5-2015
| Category: | PP Copolymer , Polypropylene Copolymer |
| Manufacturer: | Spartech Polycom |
| Trademark: | Spartech |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Gfn1VZ_Spartech-Polycom-SCR5-2015.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Spartech SCR5-2015 is a low viscosity PP copolymer resin for injection molding that features excellent process stability, good impact strength, and high stiffness. This product complies with FDA regulations and thus may be safely used in food contact and packaging applications. Polypropylene is a versatile thermoplastic offering a useful balance of heat and chemical resistance, good mechanical and electrical properties and processing ease. PP is resistant to deformation at elevated temperatures and resistant to impact at low temperatures. A very versatile product for a wide variety of applications, Spartech SCR5-2015 is recommended for packaging, houseware and consumer product applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.898 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) | 35 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield, 23°C) | 25.9 | MPa | ASTM D638 |
| Flexural Modulus (23°C) | 1050 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 85 | J/m | ASTM D256 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 90.6 | °C | |
| Drying Time | 1.0 | hr | |
| Rear Temperature | 216 - 227 | °C | |
| Middle Temperature | 221 - 232 | °C | |
| Front Temperature | 227 - 238 | °C | |
| Nozzle Temperature | 232 - 243 | °C | |
| Processing (Melt) Temp | 204 - 260 | °C | |
| Mold Temperature | 26.7 - 37.8 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TITANLENE® LDC 800YY | Lotte Chemical Titan (M) Sdn. Bhd. | LDPE | TITANLENE® |
| FM® 73 | Cytec Industries Inc. | Epoxy | FM® |
| Mablex 319V0 | Ravago Group | PC+ABS | Mablex |
| POLYFLON™ F-107 | DAIKIN AMERICA, INC. | PTFE | POLYFLON™ |
| CYCOLAC™ FR15 resin | SABIC Innovative Plastics | ABS | CYCOLAC™ |
