Order Products : sales@su-jiao.com
Prixene® EB020E20
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | POLYMAT |
| Trademark: | Prixene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GexevP_Prixene-EB020E20.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Prixene® EB020E20 is a Low Density Polyethylene grade without slip and anti-block additives. It typically exhibits better draw down ability with high output. Films typically exhibit good optics and good heat seal properties. Typical applications are bags and pouches, general purpose film. This product is not intended for use in medical and pharmaceutical applications. The features presented are good processability, low density and may be in contact with food. The product form is in pellets and the process used is for film extrusion. The material does not contain antiblok additives and sliding. The material complies with FDA regulation title 21.CFR177.1520 (. C) 2.1 and (. C) 2.2 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Secant Modulus | ASTM D882 | ||
| 1% Secant, MD : 38 µm | 175 | MPa | |
| 1% Secant, TD : 38 µm | 205 | MPa | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 38 µm | 10.0 | MPa | |
| TD : Yield, 38 µm | 10.0 | MPa | |
| MD : Break, 38 µm | 25.0 | MPa | |
| TD : Break, 38 µm | 19.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break, 38 µm | 350 | % | |
| TD : Break, 38 µm | 600 | % | |
| Dart Drop Impact (38 µm) | 85 | g | ASTM D1709A |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (60°, 38.1 µm) | 70 | ASTM D2457 | |
| Haze (38.1 µm) | 5.0 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RC Plastics RCPC 16 FR | RC Plastics, Inc. (Div. of LNP Engineering Plastics) | PC | RC Plastics |
| Sylvin 8209-75C White 1486 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| BRALEN® FB 08-65 | Slovnaft Petrochemicals, s.r.o. | LDPE | BRALEN® |
| Hyundai EP PA6 LS285 | HYUNDAI EP Co., Ltd. | Nylon 6 | Hyundai EP PA6 |
| I. Stern 3320 | I. STERN & CO. INC. | PP Copolymer | I. Stern |
