Order Products : sales@su-jiao.com

NuSil CV-2566

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GegKwO_NuSil-CV-2566.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Pourable RTV Cure, Primed Lap Shear 500 psi (3.4 MPa)

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: Pourable RTV Cure, Primed Lap Shear 500 psi (3.4 MPa)

General Information
Features	Low to No Outgassing
Uses	Adhesives Aerospace Applications Electrical/Electronic Applications Sealants
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermal	Nominal Value	Unit
CLTE - Flow	3.3E-4	cm/cm/°C

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 100
Part B	Mix Ratio by Weight: 0.50

Additional Information	Nominal Value	Unit
Cure System	Alkoxy

Uncured Properties	Nominal Value	Unit
Color	Red
Density	1.49	g/cm³
Viscosity	55	Pa·s
Curing Time (23°C)	1.7E+2	hr
Pot Life	180	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	55
Lap Shear Strength ¹	3.45	MPa
Tensile Strength	6.55	MPa
Tensile Elongation at Break	150	%
Tear Strength	7.01	kN/m
Electric Strength	32	kV/mm

Note Message
1 .	Primed with SP-120

Resin Grade	Manufacturer	Category	Trademark
VICTREX® PEEK 650G	Victrex plc	PEEK	VICTREX® PEEK
ADEKA EP-4520S	Adeka Corporation	Epoxy	ADEKA
DENIFORM 0037 ST	Vamp Tech	Acetal (POM) Copolymer	DENIFORM
Ferro PP NPP00GC19NA	Ferro Corporation	PP Homopolymer	Ferro PP
Sylvin 9077-75 Grey 9516	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin