Order Products : sales@su-jiao.com
Generic TPU-PC
| Category: | TPU-PC , Thermoplastic Polyurethane Elastomer (PC Based) |
| Manufacturer: | Generic |
| Trademark: | Generic |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | GeGDf8_Generic-TPU-PC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
This data represents typical values that have been calculated from all products classified as: Generic TPU-PC This information is provided for comparative purposes only. |
| General Information |
|---|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.15 - 1.25 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 6.0 - 7.5 | g/10 min | ASTM D1238 |
| Molding Shrinkage - Flow (23°C) | 0.80 - 0.90 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (23°C) | 55 - 95 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (23°C) | 2.93 - 45.5 | MPa | ASTM D638 |
| Tensile Stress (23°C) | 4.85 - 37.9 | MPa | ASTM D1708 |
| Tensile Elongation (Break, 23°C) | 500 - 600 | % | ASTM D638 |
| Flexural Modulus (23°C) | 4.14 - 552 | MPa | ASTM D790 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain, 23°C | 3.45 - 24.6 | MPa | ASTM D412 |
| 300% strain, 23°C | 8.27 - 31.7 | MPa | ASTM D412 |
| Tensile Strength (Break, 23°C) | 33.8 - 51.7 | MPa | ASTM D412 |
| Tensile Elongation (Break, 23°C) | 350 - 490 | % | ASTM D412 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Post Cure Time | 8.0 | hr |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 54.4 - 82.2 | °C | |
| Drying Time | 3.5 - 4.0 | hr | |
| Suggested Max Moisture | 3.0E-3 - 0.050 | % |
| Injection instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic TPU-PCThis information is provided for comparative purposes only. |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 171 | °C | |
| Cylinder Zone 2 Temp. | 182 | °C | |
| Cylinder Zone 3 Temp. | 187 - 188 | °C | |
| Cylinder Zone 4 Temp. | 193 | °C | |
| Melt Temperature | 193 - 199 | °C | |
| Die Temperature | 204 | °C | |
| Back Pressure | 9.65 - 9.67 | MPa |
| Extrusion instructions |
|---|
| This data represents typical values that have been calculated from all products classified as: Generic TPU-PCThis information is provided for comparative purposes only. |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Rilsan® BUM 30 Noir TL | Arkema | Nylon 11 | Rilsan® |
| Premi-Glas® 2207-20 CR-SX | Premix, Inc. | TS, Unspecified | Premi-Glas® |
| TABOREX TA 2385 HD | SILON s.ro | TP, Unspecified | TABOREX |
| TES J-50/30/RG BK223 | Techmer Engineered Solutions | PC | TES |
| Ferro PP TPP40AE05UL-BK | Ferro Corporation | PP Homopolymer | Ferro PP |
